Dust Collectors & Cyclones Garnic Technologies dust collectors and cyclones are designed & manufactured mainly for the powder coating industry but can be used in most other industries including abrasive blasting. Garnic Technologies Dust Collectors has the following features: - Fully automated Pulse solenoid valves and timer blocks and the system operates as in fully automated reverse pulse mode
- Fans rated and sized correctly with t 12' wg pressure
- Garnic Technologies guarantees the Filtration efficiency to be exceptional at 99% on 0.5'm Dust particles. Start up efficiency of 99% on 0.2-2'm dust particles reflects highest industry standard (BIA Class C)
- The dust collectors are designed to exhaust to the external of the building or recycle through a post filter back to the spray booth to prevent dust displacement within the work area.
- Air receiver are built to Australian pressure vessel standards
- A hopper is supplied on the base to collect dust under a vacuum seal
Garnic Technologies Cyclones have the following features: - Sized correctly to reclaim 90-95% of powder for re-use.
- Swing out base for easy cleaning.
- Quick disconnect ductwork for easy cleaning
- 65 liter hopper supplied to collect dust powder under a vacuum seal
- Mini cyclone on base to transfer reclaim powder back to powder hopper
|
